| |
Applications
Using
13.56 MHz contactless smart card technology, these iCLASSproducts provide users
with newoptions for supporting multi-authentication of identity. Combine a contactless card presentation with
afingerprint biometric. Or, use a
personal identification number (PIN) number along with a contactless card
presentation.
• The
iCLASS RWKL550 read/write contactless smart card reader with keypad and LCD
display
• The bioCLASS RWKLB575 read/write contactless smart card reader with
keypad, LCD display, and fingerprint biometric verification
• The
bioCLASS BIO500 fingerprint biometric verification module addition that can be
used to field upgrade existing keypad readers with LCD display (RWKL550)
The
bioCLASS products provide three levels of fingerprint verification. During the enrollment process, the RWKLB575 is
connected to your PC via a USB port. The
software will guide the user to place their finger on the sensor. The fingerprint template is collected at the
unit and immediately transferred to the card. During this enrollment process, the fingerprint template is stored ONLY
on the card; it is never transmitted to an external host. During verification at the door, the LCD
graphical display will assistthe user with instructions about finger placement
on the biometric sensor.
|
|
|
|
|
|
|
| |
Benefits
of these new products include:
• The products’ unique modular design provides a
high level of flexibility.
• The finger pad at the bottom center of the biometric
unit offers ease-of-use for either right or left-handed individuals.
• The location of the finger pad is compliant
with ADA
standards.
• Field upgrade from the keypad with LCD display (RWKL550) to a
biometric solution cost-effectively without downtime.
• LCD display provides
feedback on user finger placement and defines custom menu keys.
• Fingerprint
templates are stored on the iCLASScard and not in the reader. This results in:
• Increased security
• Faster
throughput
• Easier system management
• Lower costs for the biometric reader
• Reduced
concerns over individual privacy
• Choose the level of security that meets your
needs.
• Card and PIN
• Card and
fingerprint
• Card, PIN, and fingerprint
Features
• Data
Output Formats: The keypad reader reads standard proximity format data from HID
iCLASS®cards, and will output data as encoded. When reading MIFARE®cards, the
keypad reader can be configured to output 26-bit, 32-bit, 34-bit, 37-bit,
40-bit, or 56-bit Wiegand formats based on the card serial number.
Wiegand
keypad data format can be configured for transmission of individual keypresses
as ASCII encoded Hex digits, or for buffering and transmission of the PIN asa
card number in SIA 26-bit format with a configurable facility
code.
Additionally, the RWKL550 and RWKLB575 offer a USB and RS-485 connection.
Usingthe ISO 7816 protocol, the standard for contact smart card applications,
the RWKL550 and RWKLB575 allow connection to a PC or microcontroller to support
read/writeapplications.
• Keypad: Offers 12
discrete switches with metal keycaps. Raised tactile mark on the fifth keyfor
visually impaired users. Configurable audio feedback. Backlit numbers in
bezeloverlay, above each key. Lighting is configurable: Always On, Triggered by CardRead, or
Triggered by Key Press.User Function KeysFour programmable user function keys
with metal keycaps.
• User function keys: areavailable with factory default settings or can be customized. In either case, user function keys are easily defined
in the graphical LCD display.
• Security: 64-bit authentication keys are extremely
secure. Readers and cards require matching keys to function. All RF data
transmission between the card and keypad reader isencrypted, using a secure
algorithm. The key management system reduces the riskof compromised or
duplicated cards.
Cards and keypad readers with site-specific keys are
optionally available from thefactory. Alternatively, the CP575 Card Programmer
can be used to create site-specific keys. The programmer also allows users to
create a keypad reader configuration card, which is used to re-key cards and
keypad readers on site.
In addition to the card security, bioCLASS offers
additional user verification. If
you require specific information, please consult the
factory.
• Programming/Configuration: All cards are shipped with unique diversified
keys; keypad readers are shipped with compatible keys. All keys are derived from
the HID Standard key. While cards and keypad readers with Standard keys are
interchangeable, the keys are highly secure. Further enhance security by
ordering with iCLASS Elite custom keys.
• Audiovisual Indication: Audio transducer
provides configurable tone sequences to signify access granted,access denied,
power up, and configuration card read. A light bar provides a clearvisual
status indication in red, green, or amber. All units contain an LED to light
the sensor area if the biometric option is included.
• Graphical Display: The backlit
graphical LCD display offers a 60 x 18 mm viewing area, 120 x 32 resolution. It
is factory preset to provide written instructions to the user. Fully customizable, the display also describes
the function of the user function keys.
• Open
Collector Output RWKL550 and
RWKLB575: Normally open logic output, controlled via serial port. Switches up to
50mA at 12VDC. Use interposing relay for larger loads. Configurable to latch
momentarily upon successful local verification of PIN stored on the
card.
• Mounting: Mounting plate attaches to U.S./EU/ Asian back box, 52-60 mm screw
hole spacing (vertical or horizontal). Keypad/LCD reader housing latches onto
mounting plate, secured with a screw. Mounts on metal with minimal read range
impact.
• BIO Mounting: The RWKLB575 and BIO500 include a longer mounting
plate. When using the BIO500 to field
upgrade an existing RWKL550, you must remove the original mounting plate and
replace it with the longer mounting plate.
• Indoor Design: Rugged, weatherized
polycarbonate enclosure provides reliable performance and resistance to
vandalism (Please note that these products are not suitable for out-door use).
• Enrollment: Enrollment software included with the CP575 unit is required to write
the biometric template to the cards. The
template never enters the PC – it is collectedby the reader and written to the
iCLASS card all in one simple process. To
alleviate privacy and database management concerns, the biometric template is
stored on theiCLASS card rather than in the unit.
• iCLASS Credential
Compatibility: The RWKL550 and RWKLB575 are compatible with all
iCLASS credentials. The unitscan read or read/write to credentials compatible
with several ISO standards including:
• 15693 - read/write; 2k bit (256 Byte) and
16k bit (2k Byte) iCLASS credentials
• 14443A - read only; MIFARE® Standard (serial
number), Ultralight, or DESFire™
• 14443B - read/write; 16k bit (2k Bytes)
iCLASS credentials
Note: 16k bit (2k
Bytes) cards are required for biometric option.
• Warranty: Warranted against
defects in materials and workmanship for one year.
• Base Part Numbers:
• RWKL550: Read/write keypad with LCD
display 6171
• RWKLB575 Read/write keypad with LCD display 6181
and fingerprint biometric
verification
• BIO500 bioCLASSfingerprint biometric module addition 6190
• CP575
bioCLASSenrollment reader/writer with software 6251
• Options:
• Color – Black
• Key
Management - Standard or High Security
• Selectable Output Type (for MIFARE
cards)
• Termination - removable connector with miniature screw terminals
• Programmable LED/Beeper/LCD/menu key operation
Download
• Catalog
• How to Order Guide
|
