The HID EdgeReader Solo IP Access Solution puts control and user interface at the  door -- right inside the reader. The EdgeReader Solo ESR40 is a cost-effective, stand-alone, single-door IP access control solution. 

This easy-to-use solution enables remote management and report generation via standard web browser. User information, administration, door configuration and retrieval of events are done through a user-friendly, instructional web environment. Providing “Intelligence to the Door”, the flexible EdgeReader Solo ESR40 includes an integrated iCLASS R40 reader. And the EdgeReader Solo ESR40 IP Access Solution can be converted from stand-alone operation to a system reader for a host environment quickly and easily through the web browser. There is never a need to go to the door.

• Embedded User Interface, no external software requirement   
• Remotely managed via standard web browser   
• Works within DHCP or Static IP networks for plug and play installation   
• “Door Dashboard” accesses door commands, status, alarms, and recent events from all screens   
• Back-up and restore of data from user PC
• Built-in diagnostics
• Installer “calling card” allows inclusion of contact information for user support   
• User upgradable firmware   
• Built-in help screens   
• Manages 1,000 cardholders/credentials   
• Manages 8 schedules and 3 intervals each day of the week including holidays   
• View last 5,000 events   
• Standardized report generation, including CSV export   
• Built-in 802.3af Power over Ethernet (PoE), with 600 mA available for external field devices and locking hardware   
• Easily migrates to a host based system - (OEM OR CS)       
   After upgrade:    
   • 40,000 credentials
   • 65,000 Schedules    
   • Full Edge/VertX® capacities   
• Wet or Dry door relays   
• Permits local laptop computer connections for diagnostics and configuration
• Mounting: Mount to a single gang style electrical box with two screws. The EdgeReader includes tamper protection for this type of installation to secure all wiring within the electrical box. For indoor mounting only.
• Easily Interfaced
   • RJ-45 connector for Ethernet TCP/IP
   • Quick-disconnect screw terminal connectors
   • Easily upgrades to a Hosted software solution through the network interface
• Inputs for
   • 1 door monitor switch
   • 1 Request-to-Exit switch
   • AC Fail Monitor (Can be configured as a general purpose input)
   • Battery Fail Monitor (Can be configured as a general purpose input)
   • Enclosure Tamper
• Non-latching wet/dry relay outputs for
   • 1 door strike
   • 1 auxiliary device: door held/forced alarm, alarm shunt, host offline (comms down), or general purpose

Specifications

• Mounting: Single-gang style electrical box
• Dimensions: 83.8 mm x 121.9 mm x 57.9 mm
• Weight: 0.40 kg
• Style: Attractive UL94 polycarbonate enclosure protects components from damage and all connections are fully identified by silk-screened nomenclature.
• Card Data Formats: Supports any card data format up to 128 bits
• Hardware: 32-bit RISC CPU, 100 MHZ processor
• Memory: 8 MB onboard Flash memory, 32MB SDRAM, 256K SRAM
• Visual Indicators: Two LEDs indicate power/network activity and device I/O activity.
• Power Supply Requirements: 1 A @ 12-16 VDC maximum
   • Recommended: Power is supplied using the Power over Ethernet technology available with PoE (802.3af) enabled network devices.
   • Alternate: Supervised linear power supply with battery backup, input surge protection, and AC Fail and battery low contact outputs.
   • Relays can be configured to supply power as follows:
   • Available Power: The Edge Reader is capable of supplying a total of 600 mA to field devices. Unpowered, relay contacts are rated for 2 A @ 30 VDC
• Operating Temperature: 0℃ ~ 50℃ (The Edge Reader is intended for use in indoor environments)
• Operating Humidity: 5% to 95% relative, non-condensing
• Communication Ports: Ethernet - 10 or 100 Mbps
• Warranty: Warrantied against defects in materials and workmanship for 18 months.

Cable Specifications

Ethernet	300 feet (100 m)	ALPHA 9504C
	Category 5 cable	ALPHA 9405F
Input	500 feet (150 m)
	2-conductor, shielded
	22AWG	ALPHA 1292C
	18AWG	ALPHA 2421C
Output	500 feet (150 m)
Circuits	2-conductor
	22 AWG	ALPHA 1172C
	18 AWG	ALPHA 1897C
RS-232	50 feet (15 m)
	9-conductor, stranded	ALPHA 1299C
	22 AWG	ALPHA 58119

Ordering Information

• Part Number: 83120

Donwload

• Installation Guide
• Datasheet
• Ordering Information
• Software User's Guide